admin 10 February, 2019 0


Service manual for Epson Stylus Photo TX, TX, PX multifunction devices. Epson Stylus Photo TX Epson Stylus Pro and Pro Service Manual Epson Stylus Color PX TX TX Service Manual & Repair GuideEpson Stylus. [EPUB] Epson Stylus Photo Px Tx Tx Service Manual Repair Guide -. PDF Format. Book file PDF easily for everyone and every device. You can.

Author: Mekora Zull
Country: Latvia
Language: English (Spanish)
Genre: Career
Published (Last): 12 October 2004
Pages: 412
PDF File Size: 13.55 Mb
ePub File Size: 11.66 Mb
ISBN: 128-6-48461-124-6
Downloads: 7224
Price: Free* [*Free Regsitration Required]
Uploader: Malami

Release it from the hook the top and bottom surfaces with your hands; do not touch the reading surface.

Epson Stylus Photo TX650/TX659/PX650 Service manual

The carriage slowly moves to the 0-digit side to the CR lock set position. The waste ink pads have already absorbed waste ink nearly to its full capacity. Operation of the power-on sequence Table E;son for foreign object adhering to the Cap or damaged Cap. At the rear of the printer, detach the CR Motor Cable from the frame.

At the left side of the printer, remove the spring, and mark the contact point on the Parallelism Bush with the frame. Page of Go.

Rubber rollers Wipe the rollers with a cloth that is soaked with alcohol diluted with pure water. Install the tension spring properly. The printhead becomes ready for print. Head Alignment An adjustment to ensure the bi-directional print quality. Insert the Ink Cartridges x2 with the bottoms side up under the spaces outside the dowels x2 on epzon Middle Housing.

epsin Do not use the adhesive envelopes. CR lock is set White: There must be no error in handling of the Unit. Removing the CR Unit 4 6. The number of pictures available at one time is as follows: Pull out the hinge of the Scanner Unit on the left side.

Checks if the carriage is not deadlock such as the CR lock is caught in the gap of the carriage.

Epson Stylus Photo TX650 Manuals

The carriage slowly returns to its home position. Scanner document table Glass side Wipe with a clean dry cloth. Removing the Printhead 8. Read precautions described in the next section before starting.

No Replace the CR motor. Maximum number of images –When a memory card stores 1, or more images, the first images are detected and become valid in the printer. Do not touch it with your bare hand.

Mnual a circuit tester to check the FFC. Camera Direct Print Function pictbridge Epso the FFC firmly. The following two problems are considered Change or check the transmitted data. First dot position adjustment pattern line 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 Figure Replace the CR Unit.

An error has occurred in the scanner mechanism. Select [PFP Adjustment] in the adjustment program. Paper is fed normally Counterclockwise: About This Manual Provides Epson-approved methods for adjustment.

Does the error recur? A PF adjustment pattern is printed. Maual otherwise specified, disassembled units janual components can be reassembled by reversing the disassembly procedure. Check the inside of the Unit, and remove foreign matters, if any, such as paper clips, staples, bits of paper, paper dust or toner.

Cover Open Sensor Hook 1. Clean with a cotton swab.

Epson Stylus Photo PX TX TX Service Manual

The paper used must conform to the specification. Operation is normal if USB cable is replaced? Stand alone copy using the scanner function is not operating.

Waste Ink Tray Assy Backup error no external connection External device is not connected or media is not inserted.